| Here are two methods you can use to cool the water in your coffee brewer so you can check the bottom for the model number and date code: |
| Method A: |
| 1. |
Turn off the vacation switch on the left of the coffee brewer.
|
| 2. |
Unplug the coffee brewer.
|
| 3. |
Wait at least three hours for the water in the tank to cool.
|
| 4. |
Set the decanter and filter basket aside.
|
| 5. |
Unscrew the sprayhead that is located underneath where you removed the filter basket.
|
| 6. |
Take the coffee brewer over to the sink, and tilt it forward over the sink. Water will come out from the sprayhead area. Keep tilting until empty.
|
| 7. |
Write down the model number and six-digit date code located on the bottom of the coffee brewer.
|
| Method B: |
| 1. |
Turn off vacation switch on the left side of the coffee brewer.
|
| 2. |
Unplug the coffee brewer.
|
| 3. |
Pour a full decanter of fresh cold water into the decanter.
|
| 4. |
After the water stops flowing, discard the hot water in the decanter.
|
| 5. |
Repeat steps 3 and 4 one more time.
|
| 6. |
Set the decanter and filter basket aside.
|
| 7. |
Unscrew the sprayhead that is located underneath where you removed the filter basket.
|
| 8. |
Take the coffee brewer over to the sink, and tilt it forward over the sink. Water will come out from the sprayhead area. Keep tilting until empty.
|
| 9. |
Write down the model number and six-digit date code located on the bottom of the coffee brewer.
|
|
 After you have your model number and date code, please click here to continue.
|
