• Variable speed motors allow control of product consistency in mixing chamber (.75 to 6.6 grams of powder per second).
• Lighted front graphics for merchandising are easy to exchange: cappuccino or soup.
• Attractive high-impact resin door is dent and scratch resistant. Black finish or stainless with black door.
• Large easy-to-fill translucent hoppers hold 4 lbs. (1.81 kg) of product each, ensuring quick and timely refilling.
• High speed heavy-duty whipper for complete product mixing.
• Improved automatic rinsing of whipper reduces run-on after beverage is dispensed.
• Adjustable legs and drip tray accommodate 20 oz. (.59 litre) mugs easily.
• Electrical and plumbing components easily accessible through front and top.
• International electrical configurations available.

• Same well constructed FMD machine with the added convenience of a programmable touch pad.
• Easy-to-program, one-touch portion control for 3 cup sizes.
• Fast fill perfect for quick service restaurants.
• Each mixing chamber has independent powder to water ratio.
• System setup is password protected for safety.
• Simple setup and hopper throw calibration system.

• Capacity:
  FMD-4: One 8-pound hopper; three, 4-pound hoppers
  FMD-5: Five, 4-pound hoppers
• Large, lighted front graphics for merchandising.
• 6.4 gallon (24.2 litres) hot water tank to meet peak serving times.
• Cup clearance at 7” (17.8 cm) to accommodate common cup sizes.
• Electrical and plumbing components easily accessible through front and top.
• Variable speed motors allow control of product consistency in mixing chamber (.75 to 6.6 grams of powder per second).
• High speed, heavy-duty whipper for complete product mixing.
• Front of machine access to tank drain for easy service.
• Key lock on the door prevents tampering.

iMIX-3, iMIX-3 SS, iMIX-3 PC
Fresh Mix Dispenser with 3 Hoppers

• Capacity: iMIX-3: Three, 8-pound (3.6 kg) hoppers
• Large, lighted front graphics for merchandising.

NEW	NEW	NEW

• 4.4-gallon hot water tank to meet peak serving times.
• Cup clearance at 7.25” (18.4 cm) to accommodate popular cup sizes (adjustable to 8.12” (20.6 cm)).
• Key service components easily accessible through front and top.
• High speed, heavy-duty whipper for complete product mixing.
• Front of machine access to tank drain, dump valves, auger and whipper motors and control board for easy service.
• Key lock on the door prevents tampering.
• Contemporary styling for striking visual statement.
• Low product detection system alerts audibly and with message on display when hoppers are low.
• New digital technology adds night mode to prevent pilferage.
• Alphanumeric display communicates advertising messages, machine statusand technical support contact information.
• Spring-loaded, all metal auger drive system for easy hopper installation.
• Machine can be ordered with left or right-hinged doors to support side by side placement.
• Front of machine set up and calibration.
• Auger motors with RPM feedback monitoring assure consistent flavors and profits by controlling powder dosing.

iMIX-3 S (Silver Series)
Fresh Mix Dispenser 3 Hoppers

• Capacity: three, 8-pound (3.6 kg) hoppers.
• Large, lighted front graphics for merchandising.
• 4.4-gallon (16.7L) hot water tank to meet peak serving times.
• Cup clearance at 7.25” (18.4 cm) to accommodate popular cup sizes [adjustable to 8.12” (20.6 cm)].
• Variable speed motors allow control of product consistency in mixing chamber (.75 to 6.6 grams of powder per second).
• Key service components easily accessible through front and top.
• Easily removable side panels for complete access to service components.
• High speed, heavy-duty whipper for complete product mixing.
• Front of machine access to tank drain, dump valves, auger and whipper motors and control board for easy service.
• Key lock on the door prevents tampering.
• Contemporary styling for striking visual statement.
• Spring-loaded, all metal auger drive system for easy hopper installation.
• Front of machine set up and calibration.

• Can be set as push and hold or single size portion control.
• Alphanumeric display allows adjustments and service operational testing from front of machine. Also communicates advertising messages, machine status and technical support contact information.

iMIX-4 and iMIX-5
Fresh Mix Dispensers with 4 & 5 Hoppers

• Capacity:
  iMIX-4: Four, 8-pound (3.6 kg) hoppers
  iMIX-5: Five, 8-pound (3.6 kg) hoppers
• Large, lighted front graphics for merchandising.
• 7-gallon hot water tank to meet peak serving times.
• Cup clearance at 7.25” (18.4 cm) to accommodate popular cup sizes [adjustable to 8.12” (20.6 cm)].
• Key service components easily accessible through front and top.
• High speed, heavy-duty whipper for complete product mixing.
• Front of machine access to tank drain, dump valves, auger and whipper motors and control board for easy service.
• Key lock on the door prevents tampering.
• Contemporary styling for striking visual statement.
• Low product detection system alerts audibly and with message on display when hoppers are low.
• New digital technology adds night mode to prevent pilferage.
• Alphanumeric display communicates advertising messages, machine status and technical support contact information.
• Spring-loaded, all metal auger drive system for easy hopper installation.
• Machine can be ordered with left or right-hinged doors to support side by side placement.
• Front of machine set up and calibration.
• Auger motors with RPM feedback monitoring assure consistent flavors and profits by controlling powder dosing.

• Capacity: Five, 8-pound (3.6 kg) hoppers
• Large, lighted front graphics for merchandising.
• 7-gallon (26.5L) hot water tank to meet peak serving times.
• Cup clearance at 7.25” (18.4 cm) to accommodate popular cup sizes [adjustable to 8.12” (20.6 cm)].
• Variable speed motors allow control of product consistency in mixing chamber (.75 to 6.6 grams of powder per second).
• Key service components easily accessible through front and top.
• Easily removable side panels for complete access to service components.
• High speed, heavy-duty whipper for complete product mixing.
• Front of machine access to tank drain, dump valves, auger and whipper motors and control board for easy service.
• Key lock on the door prevents tampering.
• Contemporary styling for striking visual statement.
• Spring-loaded, all metal auger drive system for easy hopper installation.
• Front of machine set up and calibration.

• Can be set as push and hold or single size portion control.
• Alphanumeric display allows adjustments and service operational testing from front of machine. Also communicates advertising messages, machine status and technical support contact information.